What to Do If Your Custom Grillz Don’t Fit Perfectly

🧠 Why Your Grillz Might Not Fit Perfectly at First

There are a few reasons your grillz might feel off straight out of the box. Your teeth may have shifted slightly since your impression was taken, or the mold might not have captured every detail with full accuracy.

In some cases, temperature and humidity during shipping or storage can also affect the fit. Metals like gold and silver naturally expand when warm and contract when cold — so depending on the climate or how the grillz were stored, they might feel temporarily tighter or looser until they adjust to room temperature.

This guide will walk you through how grillz should fit, how to adjust them safely at home, and what to do if they feel too tight or too loose — especially for sets that don’t include stones.

🔹 How Grillz Should Fit

• Grillz should sit snugly and comfortably over your teeth.
• Some mild pressure or sensitivity can be normal at first — especially if your teeth have shifted slightly — but they shouldn’t feel painful or overly tight after wearing them for a short time.
• They should not move or fall off when you speak or smile.
• It’s normal for them to feel slightly unfamiliar at first — give them time to settle in.

🧼 Before You Try Them On

• Wash your hands, teeth, and grillz thoroughly.
• Make sure everything is dry before trying them on.
• Gently glide the grillz onto your teeth — they should slide into place naturally.
• If they feel secure but not tight, you can optionally use a tiny drop of denture adhesive (like Poligrip) for added hold.

🛠️ Adjusting Your Grillz at Home

Sometimes, grillz may need small tweaks to fit better. Metal has some natural give, so gentle adjustments can usually fix the issue.

Tools You’ll Need:

• Bent-nose jewellery pliers
• Soft cloth (to avoid scratches)
• Mirror and good lighting

🔄 If Your Grillz Are Too Loose

If your grillz feel like they might fall off or aren’t sitting snugly:

• Wrap the grillz in a soft cloth to protect the surface.
• Use bent-nose pliers to gently bend the back of the fangs or main contact points inward to tighten the fit.
• Adjust incrementally — just a little at a time.
• Try them on between adjustments to avoid over-tightening.
• If needed, add a small amount of denture adhesive for extra hold.

🔁 If Your Grillz Are Too Tight

If your grillz feel uncomfortably tight or painful:

• Don’t force them onto your teeth — this can damage both the grillz and your teeth.
• Wrap in a soft cloth and use pliers to slightly bend the grillz outward at the pressure points.
• Focus on the back edge of the fangs or where the tightness is most noticeable.
• Test the fit gradually and stop if any discomfort persists.
• Never bend too quickly or apply too much force.

⚠️ Grillz with Stones

If your grillz include diamonds, moissanite, or any other stones — do not attempt adjustments.

Bending the metal can shift or loosen the stone settings, increasing the risk of damage or loss. That’s why we always check the fit using a plain version before any stones are added.

🛑 A Note on DIY Adjustments

While small adjustments can help, they should be done carefully.

• Work slowly and check the fit as you go.
• Stop if you’re unsure or if there’s resistance.
• Do not bend aggressively — it can crack plating or warp the frame.

Please note: Drip Daddy is not responsible for any damage caused by self-adjustments.

🧼 Care Tips After Fitment

• Rinse gently with cool water after each wear
• Wipe clean with a soft cloth
• Avoid hot water or harsh chemicals
• Store safely in a jewellery case or pouch

✅ Final Thoughts

Getting the perfect fit for your grillz might take a little time and patience, but small tweaks can make a big difference. Whether they feel a bit loose or slightly tight at first, gentle at-home adjustments can usually help dial in the fit. Just take it slow, don’t force anything, and remember — a well-fitting set should feel secure, comfortable, and ready to flex.